How To Reset Your Johnson City System
An important advantage of getting your home security set up by trained experts is that you hardly ever find a reason to worry about it. With that being said, there may be a few instances when you need to reset your alarms in Johnson City. When using a smart command hub, your system reset normally needs only a few minor tap of a button following a false alarm, power outage, or battery change.
Check Your Manual Before Attempting An Alarm Reset
One note of caution before you try to reset your Johnson City home security system, read your instruction manual first. You don't want to compromise your property’s defense due to pressing a button in error. In addition, control panels might change if you moved from a numerical keypad to a digital command hub. Keep in mind that if you’re unable to figure out how to reset your system, don't worry as you can always reach out to the experts.
Resetting Your Johnson City Home Security System After A False Alarm
Generally, a false alarm happens because of an accidentally tripped sensor. You can utilize the central hub or bring up the ADT mobile app and touch the shield image and enter your security code to turn off the alarms when this occurs. You may get a call from your monitoring professionals, but simply inform them that it was a false alarm.
Tips To Reset Your Alarm When Experiencing A Power Outage In Johnson City
When you lose power from high winds or other factors, you may begin hearing a repeated, high-pitched beep from your alarm’s central interface. That indicates that the alarm is being powered by the battery backup. To reset the alarm and silence the constant chirping, you need to disarm/rearm the system.
However, if power is out for a longer period of time, you might need a total reset of your home’s security. Heed the directions in the manual -- normally by submitting your unique passcode and tapping the designated button twice -- and you should be back to normal. You may keep hearing the auxiliary power beeping, as it might not cease until the battery charges entirely. Call your security technician if you are still having issues with your ADT controls 20 hours after the power is resumed.
Reset Your Home Security System After Switching Out A Battery
On occasion you need to replace a battery within one of the devices in your security installation. When this needs to be done, you will change your alarm system to test mode so you avoid triggering an alarm by accident. When the you replace the old battery, remove the system from "Test Mode" and restore your usual settings. If the control panel is unable to notice the piece of equipment or the battery icon remains on, you could require a full reset of your security system.
Reset Your Johnson City Security System Following The Addition Or Deletion Of A Code
Adding and deleting people can be done on the ADT Command panel and your ADT smartphone app. You should never require a reset of your alarm after adding or removing codes. With that being said, if you find yourself moving to a new house with an existing ADT system, you need to reach out to your home security professional at (423) 241-8092 to establish a new contract. The technician will come out and upgrade components, set up other components (as required), and do a factory reset.
A Well-Designed Security System Is Only A Call Away
Attempting to reset a home security system in Johnson City can be frustrating if it isn’t equipped with user-friendly devices and controls. If you would like to get your intuitive home protection system, call (423) 241-8092 or complete the form below. Our specialists are pleased to help customize the perfect security system for your property.