Categories

System glitches and false alarms can be exasperating, and more importantly, might prevent your security system from doing its job effectively. Luckily, most problems, from false alarms to dead batteries, are easy to remedy. Take a look at our suggestions for troubleshooting your home alarm system in Johnson City. We’ll help you keep your family members safe and your system operating as it should.

Test Your Home Security System In Johnson City

One of the most sensible ways to troubleshoot your home’s security is to test it! Modern systems have a test mode so you don’t by accident prompt an emergency call. After switching to test mode, take these steps:

• Arm your system as you would when heading out.
• Open a window or door protected by a contact sensor, or test other devices. Shut the door or window once you’re done so it doesn’t trigger the alarm as you reactivate the system.
• Let the alarm go off for 60 seconds to ensure communications with the security provider and to make an entry in the alarm activity log.
• Continue testing sensors as needed
• Inspect the alarm’s activity log to validate functionality.

No need to worry, monitoring agents can see that your alarm system is being tested. Just be sure to turn test mode off when you’re done. It’s wise to test every other month or whenever you make changes to your home’s phone or internet provider.

Inspect The Position And State Of Motion Sensors

Although an essential aspect of your alarm system, motion detectors are prone to false alarms. Prevent them with a few straightforward troubleshooting steps.

• Conduct a physical check. Is there something that could shift within the path of the sensor, like a window treatment blown in a breeze?
• Is the sensor covered in dust? Cobwebs, dirt, and grime can cause poor performance. Check to confirm the device is clean.
• Does the motion detector have pet immunity you can turn on? Some sensors can be configured to disregard pets weighing up to 100 pounds.
• When was the battery changed? Low batteries might affect performance or result in false alarms.
• Is the sensor aimed toward a source of heat? Too much heat from sunlight or a fireplace can trigger an alarm.

Keep Batteries On Hand And Pay Attention To Low Battery Warnings

One of the great things about the latest home security systems is that they’ll tell you when batteries are running low. If your system has a control panel or smartphone app, you’ll typically discover notifications there. Depending on the alarm, you might notice an occasional beep when batteries are running out. 

Motion detectors, smoke detectors, contact sensors, and other wireless tools have batteries that will have to be replaced every so often. It’s best to keep batteries on hand and establish a replacement schedule. Top systems also come with a rechargeable backup battery for the main control panel. This backup battery helps keep your system running if you lose power and should recharge itself once power is restored. If it fails to recharge, you will have to replace it.

Troubleshooting Is Simple With ADT Home Security In Johnson City 

As the foremost name in home security, ADT builds systems that offer unsurpassed protection and functionality. Accessing test mode is easy through MyADT.com or the ADT+ app, and you’ll always get updates when a battery is running low. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to learn more and design a system ideal for your Johnson City home and family. Place a call to (423) 241-8092 or submit our form today!